NTI Trinity to replace oil boiler
I recently purchased a house with an oil-fired boiler that's around 30 years old and a hot water tank that's 4 years old. I plan on switching to natural gas in the spring. The first plumber I got a...
View ArticleLaars Endurance F4 Error Restarts Periodically
Hi Everyone, This is a combination propane boiler for heat with domestic hot water as well. While the unit is running, sometimes the burner will suddenly shut down and an F4 error code will appear on...
View Articlehow underfired is too underfired and how to be sure piping is the cause
Bought a house two months back and it came with a Weil-Mclain HE-5 series 3 propane boiler with an a.g.a input of 133k BTU/hr. Even when the tank is full, on a day with a temperature above freezing,...
View ArticleTriangle Tube Not Working
I have a TT Prestige 110 installed 2012 that has had annual service by the installer and has worked well. This winter the unit has stopped working and does not respond to call for heat from the...
View Article90+ Gas Furnace Misfiring (flames sputtering)
What would cause a 90% gas furnace to misfire? As soon as the burners ignite the flame “sputters” (misfire), blower is not running.
View ArticleGravity system conversion
This is my first gravity Ive done ALOT of reading if anyone has pointers on setup im all ears. had a ATCO coal boiler that was converted to oil decades ago Im guessing orig boiler was 1930s. its a...
View ArticleDoes a new boiler installation require all new pipes?
We are upgrading our heating system in a 1960s 5 bed house from a gravity fed system to a pressurised cylinder system. We have received different advice regarding the need to replace all the pipes with...
View ArticleHoneywell S8610M Ignition Control not sensing flame every third time.
I've got a Mini Gas boiler that heats my house and noticed that the flame sensor will go into reset mode about every third time. Two out of three times it will spark, sense the flame, and the burner...
View ArticlePossible to descale a peerless Mi 06 gas boiler from 2001 (in NJ)?
Thanks for reading the post and hope I can get some sound advice on this. I noticed popping / banging noises from my peerless gs boiler when it is heating up the water in the past week. Have a plan for...
View Article4a code on gb142
Repeat 4a codes and replaced sensors a few times and check wiring etc. Could it be plugged on the flow thru the exchanger? circ. working, boiler installed 2006, is this end of its life? trying to get a...
View ArticleGood Replacement Boiler For Peerless Pinnacle
Hello, I'm looking for pro advice on a good replacement boiler manufacturer to replace my Peerless Pinnacle PI-T80 boiler. I'm sure there are many good options, I'm mainly concerned with the...
View ArticleClik here to view.
"Flushing/Descaling" a Bosch Greenstar Combi 151 boiler (zwb 42-3)
Hi All, My original installer sent two different techs to my home and offered an "annual routine flush/descale" of our boiler system for a lot of money. The problem is I got two different stories from...
View ArticleHigh efficiency gas boiler keeps shutting down
Hi, thanks for reading. I had a MAC-205 installed 2 months ago and it hasn't stayed lit for more than 3 days. Weve gone through a bunch of things but I recently noticed that it calls for a 3/4 " gas...
View ArticleHoneywell Aquastat died, need advice on replacement/ upgrade options
Any and all help/ advice is greatly appreciated! :) I have an EnerJet Natural Gas Water Boiler (1) Taco circulator pump (pulling) (3) Thermostats (3) Honeywell V8043E1012 zone valves (1) Honeywell...
View ArticleFinal Decision: Indirect HWH or Turbomax Reverse Indirect/Buffer
I have a contractor who knows his stuff; one last decision to be made. With the Buderus GC 144/3 CI boiler net output of 54Kbtu, Turbomax 23 first hour rating is let's say 95 gallons, (since it's 88gal...
View ArticleTriangle Tube CC50s diagnostics
Is there a way to see the current firing rate of a CC50s boiler? I am curious to know at what level of turn-down mine is at during different run times, but I have found no information in the I&M...
View ArticleWhat to do just before X-mass New boiler
So I got a call out for a Baxi HT 380 not giving consistent hot water. They are new owners of house and they had others come out and look at boiler could not fix it. I was so worked up I didn't take...
View Articlewall mount lp heater
i have a williams wall mount heater 25000 btus i need to replace. wasn't to happy with the williams so I'm looking for suggestions. the williams had a blower on it and was sealed combustion.
View ArticleUnit heaters
Hi all, does anyone make a modine hot dawg type unit that is designed for in the home? I have a poorly insulated, sort of 3 season pool/Sun room that doesn't need to be kept warm until I want to swim....
View ArticleBurnham ES27 no heat - FIXED!!
Woke up to a cold boiler (Burnham ES27). The boiler reports the following on the IQ Boiler Control: StA (Status) 1 Standby hr (Heat Request) OFF The system though is calling for heat (through TT...
View Article