Hi. I have a Buderus Propane GB142. It was a long process to get it figured out after an installer that wasn’t really as familiar with it as they should. The open question I’m left with is the boiler capacity setting. There’s a 100 and a “- -“ is the latter encouraging modulation or is effectively running on max. I know this is in addition to the temperature controlled modulation. There’s been little guidance on this setting but when it’s at 30 I can’t keep the house warm (which was how the installer set it and took 18 months to realize was the issue) and at 100 it’s no problem but go through a ton of propane. I know I can find a range in between but just trying to determine what’s the correct setting
↧