I recently replaced two hot water radiators with hot water baseboards. I did this a few years back on the first floor and now this project is on the second floor. One basboard is working perfectly but the other is stone cold. I bled the pipe and after all of the air escaped I got a weak stream of water. By feeling the pipes, I can tell that the water is coming from the return side. This baseboard is the furthest from the boiler, for what it is worth. The radiator I took out was working fine. The pressure in the system is about 15 psi. I tried cranking it up to 25+ but that did not help. Don't know what else to try. Any suggestions?
↧